A comprehensive guide to car battery installation.

Wed Dec 17 20255 mins read

A comprehensive guide to car battery installation.

Built to last, Amaron batteries are trusted for their strength and reliability. Designed to be maintenance-free, these batteries deliver reliable performance for years even in tough environments. However, several external factors such as long hours of inactivity or driving habits can reduce the battery’s lifespan. Therefore, battery replacement becomes necessary.

Although auto battery replacement is not rocket science, it is always advisable to follow the battery replacement sequence for optimal battery performance and more power to your vehicle. So, what is the best way to install your car battery?

A comprehensive guide to car battery installation

Here is an easy guide on how to replace a car battery.

Disconnect the negative and positive!

The first step while removing the battery from your vehicle is to disconnect the negative cable before you disconnect the positive cable. Why? Since the negative cable is grounded to the chassis, disconnecting it first breaks the circuit and helps prevent sparks or accidental short circuits.

Lifting the weight is good exercise.

After the negative and positive cables are carefully removed, loosen the clamps or hold-down brackets to release the battery from the tray. Lift the battery straight up using both handles.

Even your car needs a spring cleaning once in a while

Before installing a battery in the car, make sure the battery compartment is clean and free from dust and rust. Also, clean the battery terminal clamps. Corroded or dirty terminal clamps can shorten the life of a battery.

Installing the new Amaron battery

Place your new Amaron battery in your car’s battery compartment and secure it firmly with the terminal clamps. Ensure the terminal clamps hold the battery tightly to avoid battery vibrations that can affect its performance and also lifespan. Follow this battery replacement sequence for a long-lasting battery.

Important note! Take care to ensure zero damage to the terminal clamps while cleaning or connecting them. Terminal clamps are crucial for making a secure electrical connection and keeping the battery securely in place. Tighten the clamps with the right tools.

Make the right connections.

While connecting the battery, start with the red cable on the positive terminal, then finish with the black on the negative. It’s the safest sequence for a smooth connection.

Are you Amaron ready?

Turn your key to power up your vehicle. If you have followed this battery replacement sequence then your vehicle is Amaron ready. Trust Amaron for maintenance-free batteries that are reliable and also durable.