Rely on AMARON for hassle-free performance

Amaron Tubular inverter batteries are compatible with any brand of inverters available in the market, so you are never at a loss for power. When you buy an Amaron inverter battery, you enjoy a completely hassle-free experience as the battery uses a high heat resistant calcium/ultra modified hybrid alloy for its grids which makes it zero-maintenance.

Unique Features

  • Robusta™ Spine grid is made up of high pressure die casting using robust antimony alloy for deep cycling application.
  • Satiated wet paste™ used in the battery is a highly dense & homogenous active material that delivers consistent power & long life
  • Cell Bridge Construction technology creates a bridge in the container for active material settling to avoid internal shorts due to shedding.
  • AMARON Current EV has ACS Activation Process - which is an advanced formation process that uses acid circulation technique for uniform conversion and narrow voltage variation in a string of batteries.
  • CIB™ - Class of the Best venting technique is designed with a drain-back system to minimise acid spewing and to meet safety standards against ICAT requirements.
Current Tall Tubular Battery
Amaron
CURRENT TALL TUBULAR
Warranty
54* MONTHS
Current Short Tubular Battery
Amaron
CURRENT SHORT TUBULAR
Warranty
48* MONTHS
square
Amaron
Square Wave Home UPS
Warranty
36* MONTHS
Sine Wave Home UPS
Amaron
Sine Wave Home UPS
Warranty
36* MONTHS
high capacity
Amaron
High-Capacity Sine Wave Inverters
Warranty
36* MONTHS

Safety Precautions for Home UPS / Inverter:

Do's

  • Install UPS and batteries in a ventilated area.
  • Install UPS on a flat surface only.
  • Ensure proper tightening of battery terminals.
  • Keep the switch in FC mode when the computer is working.
  • Use rated MCB, fuses & battery cables only.
  • Keep the UPS away from water and any chemicals and out of the reach of children.
  • Switch ’Off’ front panel switch before disconnecting the UPS.

Don'ts

  • Don’t use the home UPS with a local battery.
  • Don’t install the UPS & batteries in a closed container.
  • Don’t disconnect the batteries while UPS is ON.
  • Don’t connect the battery cables in the reverse direction.
  • Don’t mix different ratings/makes of batteries.
  • Don’t connect the UPS to loads other than those recommended.
  • Don’t connect the UPS output to a generator or incoming utility power.
  • Don’t operate the UPS with damaged input/output plugs or cables.
  • Don’t give UPS output to more load than UPS capacity.
  • Don’t provide connections to empty plug points.